Pool Fence Long Island
Code-compliant pool barriers that pass inspection. Nassau and Suffolk County requirements handled. Aluminum or vinyl. Self-latching gates.
Required by law: All in-ground and above-ground pools in Nassau and Suffolk County must have a compliant pool barrier. Fines apply. Pool fence permits are separate from the pool permit.
Pool Fence Code Requirements on Long Island
Long Island has one of the highest concentrations of residential in-ground pools in the United States, which means Nassau and Suffolk county inspectors see pool fences every day. The requirements are specific and enforced.
Minimum height: 48 inches (4 feet)
Measured from grade on the outside of the fence. Cannot use inside height.
Maximum bar spacing: 4 inches
Vertical picket spacing cannot exceed 4 inches. Prevents children from squeezing through.
Self-closing gate required
Gate must close and latch automatically. Must open away from the pool area.
Self-latching with thumb-turn on pool side
Latch must be at least 54 inches from grade on the pool side to prevent children from reaching it.
No horizontal rails within 45 inches
Horizontal members that could serve as footholds are prohibited below 45 inches.
Pool Fence Pricing
Most Long Island in-ground pools require 140 to 220 linear feet of pool fence. A typical project installed runs:
$30–$45/LF
Black aluminum (standard)
$32–$48/LF
Bronze aluminum
$30–$45/LF
White aluminum
Gate, permit, and post caps included. Contact us for a free written estimate.
Recent Pool Fence Jobs
Black aluminum pool fence, 4-foot height, 180 LF around in-ground pool. Self-latching gate. Passed Nassau County inspection first try.
Garden City, NY · 1 day
Bronze aluminum pool barrier, 160 LF, with two keyed gates. Code-compliant post spacing. Suffolk County inspection approved.
Huntington, NY · 1 day
White aluminum pool fence replacement, 140 LF. Previous fence failed inspection for gate latch. New fence passed.
Massapequa, NY · 1 day
Replaced self-latching gate mechanism on existing pool fence. Fence failed inspection due to improper latch. Repaired and re-inspected.
Hempstead, NY · 4 hours
Black aluminum pool fence, 200 LF around kidney-shaped in-ground pool. Custom curved gate section at pool entrance.
Babylon, NY · 2 days
4-foot black aluminum pool barrier, 120 LF. Above-ground pool with wood deck. Self-closing gate on deck access point.
Levittown, NY · 1 day
Pool Fence FAQ
What are the pool fence requirements in Nassau County?
Nassau County requires a pool barrier (fence) at least 48 inches (4 feet) high with a maximum 4-inch gap between vertical bars. Gates must be self-closing and self-latching with the latch on the pool side, out of reach of children. All pools require a permit. We know the Nassau County code and have not failed an inspection on our installations.
What about Suffolk County pool fence rules?
Suffolk County follows similar NYS requirements: minimum 4-foot barrier height, self-closing self-latching gates, and a permit. Individual towns may have additional requirements. We research the specific rules for your address before we quote.
How much does a pool fence cost on Long Island?
A standard pool fence (aluminum, 4-foot, around a typical in-ground pool) typically runs $28 to $45 per linear foot installed. Most Long Island pools need 140 to 200 linear feet. We give free written estimates.
Does my above-ground pool need a fence?
Yes. NYS and most Long Island municipalities require barriers around above-ground pools regardless of height. If the pool deck itself is 48 inches above grade and has a lockable access point, it may count as the barrier. This is case-by-case. We can advise based on your specific setup.
Will my pool fence pass the town inspection?
Every pool fence we install is built to code. If it doesn't pass inspection for any reason related to our work, we come back and fix it at no charge. We have not had a failed inspection yet.
Free Estimates
Get your pool fence estimate
We build it to code. It passes inspection. Guaranteed.